Tidigare projekt

Nedan hittar ni ett urval av tidigare projekt utförda av XX-Engineering.

handtag1

handtag2 handtag3 handtag4 handtag5 handtag6 handtag7 handtag8 handtag9 handtag10
Customized gas handle, all-steel edition, for a tractor pulling tractor. Everything build from scratch, 100% customized to meet the customer`s needs. Nothing but pure steel in the build, even the twin bearings from SKF have a steel seal.

 

traktorstol-1 traktorstol-2

Custom build outdoor chair. The customer had an old tractor seat that she wanted to use as an outdoor chair in her garden. After discussing different types of designs, materials etc we agreed upon a design with a concrete foundation and a rough metal "spring" design. Due to the materials choosen the chair will get more and more beautiful for every year in her garden!

Custom build outdoor chair.
The customer had an old tractor seat that she wanted to use as an outdoor chair in her garden. After discussing different types of designs, materials etc we agreed upon a design with a concrete foundation and a rough metal ”spring” design. Due to the materials choosen the chair will get more and more beautiful for every year in her garden!

 

 

 

imgp1881 imgp1875

 

 

Custom made, built from scratch. Approved by The Swedish Transport Agency, “Transportstyrelsen”.

Custom made, built from scratch. Approved by The Swedish Transport Agency, “Transportstyrelsen”.

 

img_1539

Custom made work out equipment, AB-wheel and parallell-bars. ”All Steel-design with only a clear coat finish.

img_1361 img_1362 img_1518 img_1519 img_1524

 

 

 

knivskruvstycke9 knivskruvstycke8 knivskruvstycke7 knivskruvstycke6 knivskruvstycke5 knivskruvstycke4 knivskruvstycke3 knivskruvstycke2

Customized knife-maker`s vise built from scrap metal.

Customized knife-maker`s vise built from scrap metal.

 

 

 

 

ordforandeklubba9

Customized gavel made out of an old coverall and stainless steel bolt. The coverall was cut into pieces and laminated toghether using polyester resin, a technique called Micarta which is commonly used as knife handles.

ordforandeklubba2 ordforandeklubba3 ordforandeklubba1 ordforandeklubba4 ordforandeklubba6 ordforandeklubba7 ordforandeklubba8

 

 

img_1371

Customized gavel in an “all Stainless steel look” with the head formed as an oil drum.

img_1369

 

 

 

img_1495

Bar chair made from an old tractor seat and beautifully rusted steel round bars.

 

 

 

4 3 2

A complete customizing of a Nordsjö 600 WA trolling boat. New electric system with 2 battery packs, echo sounder, chartplotter, GPS based anti-theft alarm, wireless MOB engine stop, etc, etc. Installed hydraulic steering, fabricated new steering consol cover, fabricated custom made bowsprit, rodholders and downrigger piedestals in stainless stell + teak, fabricated custom made isolated fishbox and baitbox with rod holders in fiber glass and installed all other neccesary fishing and safety equipment. Also customized the trailer with better gangway and spare wheel.

A complete customizing of a Nordsjö 600 WA trolling boat. New electric system with 2 battery packs, echo sounder, chartplotter, GPS based anti-theft alarm, wireless MOB engine stop, etc, etc. Installed hydraulic steering, fabricated new steering consol cover, fabricated custom made bowsprit, rodholders and downrigger piedestals in stainless stell + teak, fabricated custom made isolated fishbox and baitbox with rod holders in fiber glass and installed all other neccesary fishing and safety equipment. Also customized the trailer with better gangway and spare wheel.

 

 

edited-10 bulgarian-bags ab_wheel edited-6 landmine

landmine1 landmine2 landmine3 landmine4

 

Customized AB-wheels, “landmines”, interior + lots of other training equipment to local crossfit gym.

Customized AB-wheels, “landmines”, interior + lots of other training equipment to local crossfit gym.

 

 

 

imgp3849 imgp3847

Custom made, all stainless steel and aluminum, planerboard mast, rod holders and downriggers. Everthing custom made, down to the pulleys.

Custom made, all stainless steel and aluminum, planerboard mast, rod holders and downriggers. Everthing custom made, down to the pulleys.

 

 

Custom made, portable, pneumatic horn. Could be used remotely with pressurized tank or with an pneumatic hose for uninteruptable use.

Custom made, portable, pneumatic horn. Could be used remotely with pressurized tank or with an pneumatic hose for uninteruptable use.

 

 

Customized water station for OCR competitions.

Customized water station for OCR competitions.

 

 

 

Customized, vintage steel frame DBS-racer.

Customized, vintage steel frame DBS-racer.

vintage-dbs-2 vintage-dbs-3

 

 

 

Customized and heavily tuned Husqvarna chainsaw.

Customized and heavily tuned Husqvarna chainsaw.

cimg1728 dsc_0133

 

 

 

Access control system for local crossfit gym. Access by RFID tags. Computer interface with almost unlimited user abilities.

Access control system for local crossfit gym. Access by RFID tags. Computer interface with almost unlimited user abilities.