Previous jobs

Below you find a selection of jobs performed by XX-ENGINEERING.

 

 

Blandare/doserare till företaget Bokashi i Säffle Ett projekt från R&D till produktion. Hur bygger man en matarskruv, vilken stigning/varvtal blir bäst, hur får man mediat att blandas/finfördelas bäst och inte fastna i tratten, hur får man till bästa arbetsmiljön för operatören, etc, etc? Tillsammans med Bertil Olsson på ME Gård & Teknik AB fick jag frågan av Bokashi att vara med och utveckla samt tillverka en prototyp till deras fabrik i Säffle. Deras företag går för högtryck och de behövde öka produktiviteten i fabriken i Säffle. Denna prototyp har varit i drift sedan i början av sommaren 2021 och den både blandar och doserar i ett steg för att förenkla logistiken, öka produktiviteten och avsevärt förbättra arbetsmiljön för operatören. Bertil har kommit med massa bra idéer och bra ritningsunderlag som jag efter hand försökt förverkliga. Sedan har vi, tillsammans med inputs från personalen i fabriken, justerat efter hand. Tack för förtroendet Malin Sairio på Bokashi och Bertil Olsson på ME Gård & Teknik AB.

Blandare/doserare till företaget Bokashi i Säffle
Ett projekt från R&D till produktion. Hur bygger man en matarskruv, vilken stigning/varvtal blir bäst, hur får man mediat att blandas/finfördelas bäst och inte fastna i tratten, hur får man till bästa arbetsmiljön för operatören, etc, etc?
Tillsammans med Bertil Olsson på ME Gård & Teknik AB fick jag frågan av Bokashi att vara med och utveckla samt tillverka en prototyp till deras fabrik i Säffle.
Deras företag går för högtryck och de behövde öka produktiviteten i fabriken i Säffle. Denna prototyp har varit i drift sedan i början av sommaren 2021 och den både blandar och doserar i ett steg för att förenkla logistiken, öka produktiviteten och avsevärt förbättra arbetsmiljön för operatören.
Bertil har kommit med massa bra idéer och bra ritningsunderlag som jag efter hand försökt förverkliga. Sedan har vi, tillsammans med inputs från personalen i fabriken, justerat efter hand.
Tack för förtroendet Malin Sairio på Bokashi och Bertil Olsson på ME Gård & Teknik AB.

Foto 2020-11-26 09 09 16 Foto 2020-11-26 09 07 19 Foto 2020-11-26 15 42 06 Foto 2020-11-26 11 28 54 Foto 2020-11-24 12 37 28 Foto 2020-11-05 22 05 15

 

 

Trappräcken till Långseruds kyrka. Design, tillverkningsprocess, ytbehandling, montering etc skulle allt bollas med antikvarie ner på detaljnivå för att tillgodose beställarens ansökan hos Länsstyrelsen. En intressant och lärorik process att få vara delaktig i!

Trappräcken till Långseruds kyrka. Design, tillverkningsprocess, ytbehandling, montering etc skulle allt bollas med antikvarie ner på detaljnivå för att tillgodose beställarens ansökan hos Länsstyrelsen. En intressant och lärorik process att få vara delaktig i!

 

 

 

Decoration for the memorial grove at Långserud's church. Candle / flower carrier in a combination of forged steel and bohus granite as well as natural stone. The steel is hot-dip galvanized and powder-coated for the best rust protection. Some key factors in the design were that it would blend well into the existing environment and fit in with the fine decorations that already exist, but also that it would be something unique and something that can be linked to the area. Therefore, black powder coated steel was mixed with stone and the candle / flower holders that are closest to the fountain were built with gables in the same Bohus granite that is found in the existing fountain. The other, free-standing candle / flower carrier, I designed as the area's ancient "Långserudsmört" where the holders can be seen as fish scales and where the foundation consists of roots that grow out of the ground and wind up around a large natural stone. The natural stone also has a local connection as it originates from the rectory in Långserud where I myself grew up. Some viewers may also find similarities between this "Långserudsmört" and the stylized fish that symbolizes Christianity, ICHTHYS… I myself have built everything, except the Bohus granite, in the ancient smithy at Sund in Säffle. Everything is hand-forged and whoever looks closely at the decorations sees that no two parts are alike. I feel a great gratitude that has had the honor of developing this decoration for my beautiful native place!

Decoration for the memorial grove at Långserud’s church. Candle / flower carrier in a combination of forged steel and bohus granite as well as natural stone. The steel is hot-dip galvanized and powder-coated for the best rust protection.
Some key factors in the design were that it would blend well into the existing environment and fit in with the fine decorations that already exist, but also that it would be something unique and something that can be linked to the area. Therefore, black powder coated steel was mixed with stone and the candle / flower holders that are closest to the fountain were built with gables in the same Bohus granite that is found in the existing fountain.
The other, free-standing candle / flower carrier, I designed as the area’s ancient “Långserudsmört” where the holders can be seen as fish scales and where the foundation consists of roots that grow out of the ground and wind up around a large natural stone.
The natural stone also has a local connection as it originates from the rectory in Långserud where I myself grew up.
Some viewers may also find similarities between this “Långserudsmört” and the stylized fish that symbolizes Christianity, ICHTHYS…
I myself have built everything, except the Bohus granite, in the ancient smithy at Sund in Säffle. Everything is hand-forged and whoever looks closely at the decorations sees that no two parts are alike.
I feel a great gratitude that has had the honor of developing this decoration for my beautiful native place!

Foto 2020-10-31 15 57 07 Foto 2020-10-31 15 56 56 Foto 2020-10-31 21 50 24

Foto 2020-04-09 14 57 35 Foto 2020-04-27 18 34 32 Foto 2020-04-27 17 13 18 Foto 2020-04-06 12 25 02 Foto 2020-04-01 08 01 37 Foto 2020-03-23 09 26 33 Foto 2020-03-16 13 56 00 Foto 2020-03-23 09 26 26

 

 

 

 

Corten-steel sign holders for Säffle municipality. A total of 15 fabricated and 11 of them are now installed in the city of Säffle.

Corten-steel sign holders for Säffle municipality. A total of 15 fabricated and 11 of them are now installed in the city of Säffle.

Skylthållare 999 Skylthållare11 Skylthållare22 Skylthållare77 Skylthållare88

 

 

 

 

Laser-cut steel sign fabricated from a 10mm thick steel plate that I pre-rusted before delivery.

Laser-cut steel sign fabricated from a 10mm thick steel plate that I pre-rusted before delivery.

Foto 2021-07-22 17 15 24 Foto 2021-07-22 17 39 27 (1)

 

 

 

 

Corten steel sign laser cut from a 8mm thick plate and mounted on a big stone.

Corten steel sign laser cut from a 8mm thick plate and mounted on a big stone.

Foto 2021-04-29 10 43 49

 

 

 

 

3 2

Custom built kitchen table. 100x280cm. Fully welded steel legs and frame with a table top made of zink with a homemade patina.

Custom built kitchen table. 100x280cm. Fully welded steel legs and frame with a table top made of zink with a homemade patina.

 

 

 

Custom build trophy for the motor event Seffle City Motor Challenge 2019. An intake valve from a big ship engine, ball bearing and 2pcs 32mm wrenches from West Germany, all topped of with a ball bearing ball from a generator bearing.

Custom built trophy for the motor event Seffle City Motor Challenge 2019. An intake valve from a big ship engine, ball bearing and 2pcs 32mm wrenches from West Germany, all topped of with a ball bearing ball from a generator bearing.

 

 

 

ljus1

Custom built, all steel, candle carrier for a church. Built out of a very old 10 mm steel plate that have been out in the open for a long while, creating lots of pitting and beautiful patina. Everything cut manually and fabricated extra rough to create a “natural” look. Hidden wall mounts for mounting on the wall. Clear coat finish too create and maintain the rough and natural look.

ljus2 ljus3

 

 

 

 

 

bord1

bord2

bord3

Custom built coffee table. Concrete table top with a surface treatment that can handle coffee and wine spill. All steel frame and legs made from partly recycled steel with beautiful patina. Clear coat finish on the steel parts to maintain the rough steel look.

 

 

 

 

Bänk4

Customized, black, pour in place kitchen countertops. Built, and surface treated, to withstand the daily wear and tear in the kitchen and to be easy cleaned and maintained.

Bänk1 Bänk2 Bänk3

 

 

 

 

Customized gear shifter handel, all-steel edition, for a tractor pulling tractor. Everything build from scratch, 100% customized to meet the customer`s needs.

Customized gear shifter handel, all-steel edition, for a tractor pulling tractor. Everything build from scratch, 100% customized to meet the customer`s needs.

Handtag88 Handtag99

 

 

 

 

Custom build funnel in stainless steel to fit a specific application / process.

Custom built funnel in stainless steel to fit a specific application / process.

2 3

 

 

 

 

Customized gas handel, all-steel edition, for a tractor pulling tractor. Everything build from scratch, 100% customized to meet the customer`s needs. Nothing but pure steel in the build, even the twin bearings from SKF have a steel seal.

Customized gas handel, all-steel edition, for a tractor pulling tractor. Everything build from scratch, 100% customized to meet the customer`s needs. Nothing but pure steel in the build, even the twin bearings from SKF have a steel seal.

handtag2 handtag3 handtag4 handtag5 handtag6 handtag7 handtag8 handtag9 handtag10

 

 

 

 

Custom build outdoor chair. The customer had an old tractor seat that she wanted to use as an outdoor chair in her garden. After discussing different types of designs, materials etc we agreed upon a design with a concrete foundation and a rough metal "spring" design. Due to the materials choosen the chair will get more and more beautiful for every year in her garden!

Custom build outdoor chair.
The customer had an old tractor seat that she wanted to use as an outdoor chair in her garden. After discussing different types of designs, materials etc we agreed upon a design with a concrete foundation and a rough metal “spring” design. Due to the materials choosen the chair will get more and more beautiful for every year in her garden!

traktorstol-2 traktorstol-3

 

 

 

Custom made, built from scratch. Approved by The Swedish Transport Agency, "Transportstyrelsen".

Custom made, built from scratch. Approved by The Swedish Transport Agency, “Transportstyrelsen”.

imgp1875 imgp1881

 

 

 

img_1539

Custom made work out equipment, AB-wheel and parallell-bars. “All Steel-design with only a clear coat finish.

img_1524 img_1518 img_1519 img_1362

img_1361

 

 

ordforandeklubba6

Customized gavel made out of an old coverall and stainless steel bolt. The coverall was cut into pieces and laminated toghether using polyester resin, a technique called Micarta which is commonly used as knife handles.

ordforandeklubba2 ordforandeklubba3 ordforandeklubba4 ordforandeklubba7  ordforandeklubba9

 

 

 

 

 

 

knivskruvstycke9 knivskruvstycke8 knivskruvstycke7 knivskruvstycke6 knivskruvstycke5 knivskruvstycke4 knivskruvstycke3 knivskruvstycke2

Customized knife-maker`s vise built from scrap metal.

Customized knife-maker`s vise built from scrap metal.

 

 

 

 

 

Access control system for local crossfit gym. Access by RFID tags. Computer interface with almost unlimited user abilities.

Access control system for local crossfit gym. Access by RFID tags. Computer interface with almost unlimited user abilities.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

imgp3849 imgp3844

Custom made, all stainless steel and aluminum, planerboard mast, rod holders and downriggers. Everthing custom made, down to the pulleys.

Custom made, all stainless steel and aluminum, planerboard mast, rod holders and downriggers. Everthing custom made, down to the pulleys.

 

 

A complete customizing of a Nordsjö 600 WA trolling boat. New electric system with 2 battery packs, echo sounder, chartplotter, GPS based anti-theft alarm, wireless MOB engine stop, etc, etc. Installed hydraulic steering, fabricated new steering consol cover, fabricated custom made bowsprit, rodholders and downrigger piedestals in stainless stell + teak, fabricated custom made isolated fishbox and baitbox with rod holders in fiber glass and installed all other neccesary fishing and safety equipment needed. Also customized the trailer with better gngway and spare wheel.

A complete customizing of a Nordsjö 600 WA trolling boat. New electric system with 2 battery packs, echo sounder, chartplotter, GPS based anti-theft alarm, wireless MOB engine stop, etc, etc. Installed hydraulic steering, fabricated new steering consol cover, fabricated custom made bowsprit, rodholders and downrigger piedestals in stainless stell + teak, fabricated custom made isolated fishbox and baitbox with rod holders in fiber glass and installed all other neccesary fishing and safety equipment. Also customized the trailer with better gangway and spare wheel.

2 3 4